TRANSPORTATION PRODUCT:-
1. Mini Rake –
Mini rakes can be booked at train load class rates under following conditions.
i. Goods can be booked only in covered wagon.
ii. Minimum number of wagons – 20 covered wagon.
iii. It will be booked from and to any notified full or half rake terminal.
iv. Free time for loading / unloading – 5 hour.
v. Maximum distance for booking – 600 km**
vi. Permitted only in Covered wagons.
vii. Excluding Coal, Ores and Raw material for Steel plant.
viii. Supplementary surcharge of 5% will be levied from 1st Oct to 30th June on base freight.
** Valid till 14/07/2017
2. Two point Rake –
Two point rakes can be booked at train load class rates under following conditions.
a. This product is available only for Covered wagons. **
b. Originating Terminal should be a notified full or half rake terminal.
c. Both destination terminals should be a notified full or half rake terminal
d. Distance between both terminal should be-
i. Not more than 200 kms in busy season
ii. Not more than 400 kms in lean season.
e. Minimum 10 wagons should be loaded for each destination,
f. Total number of wagons indented and loaded must conform to standard the Block rake composition.
g. Supplementary surcharge of 5% will be levied from 1st Oct to 30th June on base freight.** Valid till 14/07/2017
3. Multi-Pont Rake-
Multi point rake can be booked at train load class rates under following conditions:-
a. This product is available only for Covered wagons.**
b. Originating Terminal should be notified full or half rake terminal.
c. Each destination terminal should be notified full or half rake terminal.
d. Minimum 10 wagon to be loaded for each destination station.
e. Total numbers of wagon indented and loaded must conform to the standard block rake composition,
f. Supplementary charges of 20% will be levied from 1st Oct to 30th June on base freight.
** Valid till 14/07/2017
4. Two and Multi point Rake (other than covered wagon):-
Two and Multi point Rake (other than covered wagon) can be booked at trainload class rates under following conditions:
a. Originating terminal should be notified as full or half rake terminal.
b. Each destination terminal should be notified full or half rake terminal.
c. List of two and multi point combination will be notified by Railway Administration.
d. Minimum 10 wagons should be loaded for each destination terminal.
e. Total number of wagon indented and loaded must conform to the standard Block rake composition.
f. Supplementary charges of 5%will be levied on Two Point rake and 20% on Multi Point rake from 1st Oct to 30th June on base freight.
5. Rake from Two Originating Terminal:-
Rake from Two Originating Terminal can be booked at train load class rates under following conditions:
a. This product is available for Covered wagons only.
b. List of two point combination will be notified by Zonal Railway.
c. Each Originating terminal should be notified full or half rake terminal.
d. Destination terminal should be a notified full or half rake terminal.
e. Distance between the two terminals should not be more than 200kms.
f. Minimum 10 wagons should be loaded from each originating terminal.
g. Total numbers of wagons indented and loaded must conform to the block rake composition.
i. The customers cannot cancel indent at one point after he has started loading at other point. If he does so, the entire freight will be charged for all wagons.
ii. Supplementary surcharge of 05% from will be levied 1st OCT to 30th June on base freight.
6. Rakes from Two Originating Terminals (other than covered wagon):–
Wagon can be booked at train load class rates under following conditions:
i. List two of points combinations will be notified by Zonal Railway.
ii. Each Originating terminal should be a notified full or half rake terminal.
iii. Destination terminal should be a notified full or half rake terminal.
iv. Minimum 10 wagons should be loaded from each originating terminal.
v. Total numbers of wagons indented and loaded must confirm the block rake composition.
vi. The customers cannot cancel indent at one point after he has started loading at other point. If he does so, the entire freight will be charged for all wagons.
vii. Supplementary surcharges of 05% will be levied from 1st OCT 30th June on base freight.
1. Mini Rake –
Mini rakes can be booked at train load class rates under following conditions.
i. Goods can be booked only in covered wagon.
ii. Minimum number of wagons – 20 covered wagon.
iii. It will be booked from and to any notified full or half rake terminal.
iv. Free time for loading / unloading – 5 hour.
v. Maximum distance for booking – 600 km**
vi. Permitted only in Covered wagons.
vii. Excluding Coal, Ores and Raw material for Steel plant.
viii. Supplementary surcharge of 5% will be levied from 1st Oct to 30th June on base freight.
** Valid till 14/07/2017
2. Two point Rake –
Two point rakes can be booked at train load class rates under following conditions.
a. This product is available only for Covered wagons. **
b. Originating Terminal should be a notified full or half rake terminal.
c. Both destination terminals should be a notified full or half rake terminal
d. Distance between both terminal should be-
i. Not more than 200 kms in busy season
ii. Not more than 400 kms in lean season.
e. Minimum 10 wagons should be loaded for each destination,
f. Total number of wagons indented and loaded must conform to standard the Block rake composition.
g. Supplementary surcharge of 5% will be levied from 1st Oct to 30th June on base freight.** Valid till 14/07/2017
3. Multi-Pont Rake-
Multi point rake can be booked at train load class rates under following conditions:-
a. This product is available only for Covered wagons.**
b. Originating Terminal should be notified full or half rake terminal.
c. Each destination terminal should be notified full or half rake terminal.
d. Minimum 10 wagon to be loaded for each destination station.
e. Total numbers of wagon indented and loaded must conform to the standard block rake composition,
f. Supplementary charges of 20% will be levied from 1st Oct to 30th June on base freight.
** Valid till 14/07/2017
4. Two and Multi point Rake (other than covered wagon):-
Two and Multi point Rake (other than covered wagon) can be booked at trainload class rates under following conditions:
a. Originating terminal should be notified as full or half rake terminal.
b. Each destination terminal should be notified full or half rake terminal.
c. List of two and multi point combination will be notified by Railway Administration.
d. Minimum 10 wagons should be loaded for each destination terminal.
e. Total number of wagon indented and loaded must conform to the standard Block rake composition.
f. Supplementary charges of 5%will be levied on Two Point rake and 20% on Multi Point rake from 1st Oct to 30th June on base freight.
5. Rake from Two Originating Terminal:-
Rake from Two Originating Terminal can be booked at train load class rates under following conditions:
a. This product is available for Covered wagons only.
b. List of two point combination will be notified by Zonal Railway.
c. Each Originating terminal should be notified full or half rake terminal.
d. Destination terminal should be a notified full or half rake terminal.
e. Distance between the two terminals should not be more than 200kms.
f. Minimum 10 wagons should be loaded from each originating terminal.
g. Total numbers of wagons indented and loaded must conform to the block rake composition.
i. The customers cannot cancel indent at one point after he has started loading at other point. If he does so, the entire freight will be charged for all wagons.
ii. Supplementary surcharge of 05% from will be levied 1st OCT to 30th June on base freight.
6. Rakes from Two Originating Terminals (other than covered wagon):–
Wagon can be booked at train load class rates under following conditions:
i. List two of points combinations will be notified by Zonal Railway.
ii. Each Originating terminal should be a notified full or half rake terminal.
iii. Destination terminal should be a notified full or half rake terminal.
iv. Minimum 10 wagons should be loaded from each originating terminal.
v. Total numbers of wagons indented and loaded must confirm the block rake composition.
vi. The customers cannot cancel indent at one point after he has started loading at other point. If he does so, the entire freight will be charged for all wagons.
vii. Supplementary surcharges of 05% will be levied from 1st OCT 30th June on base freight.
No comments:
Post a Comment